Pipe Fusion Equipment

Pipe Fusion Equipment

LEARN MORE ABOUT OUR PIPE FUSION TOOLS & ACCESSORIES


View some of our products, equipment, and accessories to get a sense for how we can help you.

PIPE FUSION


RAM 14
Manual butt fusion welder for pipes 1" IPS - 4" DIPS (40 mm to 160 mm). Leading fixtures are the restricted weight, minimum overall dimensions and versatility. Featuring: a machine body, two clamps, an extractable electric milling cutter provided with a safety micro-switch, an extractable heating plate (with an independent thermometer to see the real working temperature and an electronic thermo regulator "Digital Dragon" with display), a locking device that helps the operator to apply the necessary welding force and two lateral supports (on request). The machine is designed to butt fuse tees, ells and other fittings.

• Job site manual welding machine
• Lightweight, minimum overall dimensions and versatility
• Working range: Ø 1" IPS - 4" DIPS (40-160 mm)
• Power supply: 110 V and 230 V
• Milling cutter provided with a safety micro-switch
• Electronic thermos-regulator "Digital Dragon"
• Fuse a variety of fittings

Accessories available:
• An optional 2 wheels stand/trolley for easy transport
• Lateral pipe supports
Ram 14 Brochure
RAM 28
The RAM 28 is an electro-hydraulic butt fusion machine with fusion capabilities ranging from 2" IPS to 8"" DIPS (75 mm - 225 mm) pipe sizes. It is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes. 

RAM 28 is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 110 V and 230 V versions.

• Wheeled chassis for easy maneuvering on the jobs
• Machine body and control panel can be easily removed for in ditch use
• Working range: Ø 2" IPS - 8" DIPS (75 mm - 225 mm)
• Body machine with two working position: inclined or horizontal
• On board milling cutter with safety micro switch
• Automatic Fusion Control "EASY LIFE" SMARTLock inserts
• Lateral pipe lift aids in loading and unloading pipe

On Request (Accessories)
Tool for flange necks
Software for data download (data logging) with serial / USB cable
Ram 28 Brochure
RAM 414
The RAM 414 is an independent and motorized electro-hydraulic butt fusion machine with fusion capabilities ranging from 4" IPS to 14" IPS (125 - 355 mm) pipe sizes. The machine is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes.

• Independent, self-contained
• On board generator
• Powered by a low vibration gas engine
• Machine body and control panel can be easily removed for in-ditch use
• Working range: Ø 4 IPS - 14 IPS
• Motorized wheels
• Semi-Automatic
• Fusion Control "EASY LIFE"
• GPS System incorporated
• Electronic thermoregulator "Digital Dragon"
• Milling cutter with safety micro-switch
• SMARTLock inserts
• Lateral pipe lift aids in loading and unloading pipe
• Data-logging incorporated

On Request (Accessories)
Available on request with Diesel engine
Working range Ø 4" IPS - 14" IPS pipe (125 - 355 mm)
Power supply Self-contained / independent gasoline engine 15HP
Overall weight of standard machine 1279 lbs. (580 Kg)
Weight of machine body (with milling cutter /trolley) 1221 lbs. (554 Kg)
Weight of machine body with milling cutter (without trolley) 430 lbs. (195 Kg)
Weight of milling cutter 83.8 lbs. (38 Kg)
Pressure working range 0 - 2175 PSI (0 - 150 bar)
Heater working temperature 356 - 536° F (180 - 280°C)
Inserts (Set = 8 pcs/Ø)
DIPS Pipe Pipe OD IPS Pipe OD mm Pipe OD
4" 4.80" 4" 4.50" 125 4.92"
6" 6.90" 5" 5.56" 140 5.51"
8" 9.05" 6" 6.63" 160 6.30"
10" 11.10" 8" 8.63" 180 7.09"
12" 13.20" 10" 10.75" 200 7.87"
12" 12.75" 225 8.86"
14" 14.00" 250 9.84"
280 11.02"
315 12.40"
355 13.98"
Ram 414 Brochure
RAM 824
The RAM 824 ALL TERRAIN is the Pipe and Fittings Fusion Machine designed to face the toughest working conditions. RAM 824 ALL TERRAIN wants to mark a turning point to the world of Field Fusion. It stands out for being extremely easy to set up and work with. Take the heating plate and facer disconnecting system for example: the positioning / removal of the pipes is made without obstacles, giving the operator more time for what really matters. Italian design, known for paying attention to details, gives RAM 824 ALL TERRAIN many technical innovations that are indeed practical. Take the clamps hydraulic system, for instance – not only an aesthetical maneuver, but a protection against collisions while positioning the machine inside the trench. Take the low fuel consumption and soundproofing gear - protects the environment, your health and saves you money!

• Working range: Ø 8" IPS - 24" DIPS (355 - 630 mm)
• 4 steering wheels drive
• Diesel engine
• Self-contained with on-board generator
• Sliding 3rd CLAMP for fittings welding
• Automatic welding System "Easy Life"
• DATA-LOGGING with GPS
• Detachable Control Panel
• Trench-Friendly
• SMARTLock Inserts
• Hydraulic Lifts
• Hydraulic-controlled clamps and milling cutter
• Climbs rough terrain up to 30%
Working range Ø 8" IPS - 24" DIPS pipe
Pressure working range 0 - 2176 PSI
Engine 2200 cc - 22,7 kW
Fuel type Diesel
Fuel tank capacity 10.5 Gallons
Operational tank capacity 12 hours
Materials HDPE, PP, PVDF
Weight: Only body machine 1763.7 lbs.
Weight: Heater 110 lbs.
Weight: Facer 330.6 lbs.
Total weight 6613.8 lbs.
Inserts
DIPS Pipe Pipe OD IPS Pipe OD mm Pipe OD
8" 9.05" 8" 8.63" 225 8.86"
10" 11.10" 10" 10.75" 250 9.84"
12" 13.20" 12" 12.75" 280 11.02"
14" 15.30" 14" 14.00" 315 12.40"
16" 17.40" 16" 16.00 355 13.98"
18" 19.50" 18" 18.00" 400 15.75"
20" 21.60" 20" 20.00" 450 17.72"
22" 22.00" 500 19.69"
24" 24.00" 560 22.05"
630 24.80"
Ram 824 Brochure
Delta Dragon 160
Self-aligning hydraulic butt fusion machine, suitable for welding under pressure pipes for water, gas and other fluids up to Ø 5" DIPS (160 mm). 

Delta Dragon 160 is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 110 V and 230 V versions.

• Working range: Ø 1 - 1/4" IPS to 5" IPS (40 - 160 mm)
• Compact design for easy in ditch use
• Electro-hydraulic unit
• Electronic thermo regulator "Digital Dragon"
• Milling cutter with safety micro switch
• SMARTLock inserts

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 1 - 1/4" IPS to 5" IPS (40 - 160 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 110 V 50-60Hz 1Ph, 230 V 50-60 Hz 1 Ph
Total absorbed power 1900 W
Total weight 149 lbs.
Delta Dragon 250B
Self-aligning hydraulic butt fusion machine, suitable for welding under pressure pipes for water, gas and other fluids up to Ø 8" DIPS (250 mm). 

Delta Dragon 250 B, thanks to the machine body configurations, is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 110 V and 230 V versions.

• Working range: Ø 2" IPS to 8" DIPS (75 - 250 mm)
• Compact design for easy in ditch use
• Body machine with two working position: inclined or horizontal
• Electro-hydraulic unit
• Electronic thermo regulator "Digital Dragon"
• Milling cutter with safety micro switch
• SMARTLock inserts
• Lateral pipe lift aids in loading and unloading pipe

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
• Attachable pipe rollers
Pipe range 3" IPS to 8" DIPS (75 - 250 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 110 V 50-60Hz 1Ph, 230 V 50-60 Hz 1 Ph
Total absorbed power 3470 W
Total weight 160 lbs.
Delta Dragon 315B
Self-aligning hydraulic butt fusion machine, suitable for welding under pressure pipes for water, gas and other fluids up to Ø 10" DIPS (315 mm). 

Delta Dragon 315 B, thanks to the machine body configurations, is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 110 V and 230 V versions.

• Working range: Ø 3" IPS to 10" IPS (90 - 315 mm)
• Compact design for easy in ditch use
• Body machine with two working position: inclined or horizontal
• Electro-hydraulic unit
• Electronic thermo regulator "Digital Dragon"
• Milling cutter with safety micro switch
• SMARTLock inserts
• Lateral pipe lift aids in loading and unloading pipe

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
• Attachable pipe rollers
Pipe range 3" IPS to 10" DIPS (90 - 315 mm) Hydraulic
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 230V 50-60Hz / 120 V 50-60Hz
Total absorbed power 4500 W
Total weight 352 lbs.
Delta Dragon 355B
Self-aligning hydraulic butt fusion machine, suitable for welding under pressure pipes for water, gas and other fluids up to Ø 14" IPS (355 mm). 

Delta Dragon 355 B, thanks to the machine body configurations, is able to weld fittings like elbows, tees, Y-branches and flanges necks. Available in the 230 V versions.

• Working range: Ø 4" IPS to 14" IPS (125 - 355 mm)
• Compact design for easy in ditch use
• Body machine with two working position: inclined or horizontal
• Electro-hydraulic unit
• Electronic thermoregulator "Digital Dragon"
• Milling cutter with safety micro switch
• SMARTLock inserts
• Lateral pipe lift aids in loading and unloading pipe

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
• Attachable pipe rollers
Pipe range 4" IPS to 14" IPS (125 - 355 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 230V 50-60Hz
Total absorbed power 5800 W
Total weight 1279 lbs.
Delta 500
This is a self-aligning machine, suitable for welding pipe for the transport of water, gas and other fluids under pressure, up to Ø 18" IPS (500 mm). 

The Delta 500 can weld fittings without the need for any additional equipment: elbows, tees, wyes and stub-end can be welded by simply taking the fourth clamp off the machine body's frame. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps. Available in 240 V single phase and 400 V 3-phase.

• Working range: Ø 8" IPS to 18" IPS (200 - 500 mm)
• Extractable heating plate with separate thermometer
• Milling cutter with safety micro switch
• Electrohydraulic gearcase
• Thermoregulator for the control of the working temperature

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 8" IPS to 18" IPS (200 - 500 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 230V, 50 - 60 Hz, 1 Ph, or 400V 50 - 60Hz, 3 Ph.
Total absorbed power 7925 W - 7190 W
Total weight 802.5 lbs.
Delta 630
This is a self-aligning machine, suitable for welding pipes for the transport of water, gas and other fluids under pressure, up to Ø 24" IPS (630 mm). 

Delta 630 can weld fittings such as elbows, tees, wyes and flange necks. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. 

The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.

• Working range: Ø 14" IPS to 24" IPS (355 - 630 mm)
• Extractable heating plate with separate thermometer
• Milling cutter with safety micro switch
• Thermoregulator for the control of the working temperature

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 14" IPS to 24" IPS (355 - 630 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 230V, 50 - 60 Hz, 1 Ph, or 400V 50 - 60Hz, 3 Ph.
Total absorbed power 11412 W
Total weight 1263 lbs.
Delta 800
This is a self-aligning machine, suitable for welding pipes for the transport of water, gas and other fluids under high pressure, up to Ø 30" IPS (800 mm). 

Delta 800 can weld fittings such as elbows, tees, wyes and stub-end. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. 

The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.

• Working range: Ø 20" IPS to 30" IPS (500 - 800 mm)
• Extractable heating plate with separate thermometer
• Milling cutter with safety micro switch
• Electrohydraulic gearcase
• Thermoregulator for the control of the working temperature

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 20" IPS to 30" IPS (500 - 800 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 400V 50 - 60Hz, 3 Ph.
Total absorbed power 16416 W
Total weight 2672 lbs.
Delta 1000
This is a self-aligning machine, suitable for welding pipes for the transport of water and other fluids under high pressure, up to Ø 36" DIPS (1000 mm). 

DELTA 1000 can weld fittings such as elbows, tees, wyes and stub-end. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. 

The fitting must be locked in the 4th clamp. Stub-ends with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.

• Working range: Ø 24" IPS to 36" IPS (630 - 1000 mm)
• Extractable heating plate with separate thermometer
• Milling cutter with safety micro switch
• Electrohydraulic gearcase
• Thermoregulator for the control of the working temperature

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 24" IPS to 30" IPS (630 - 1000 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 400V 50 - 60Hz, 3 Ph.
Total absorbed power 25700 W
Total weight 7308 lbs.
Delta 1200
This is a self-aligning machine, suitable for welding pipes for the transport of water, and other fluids under high pressure, up to Ø 48" IPS (1200 mm). 

DELTA 1200 can weld fittings such as elbows, tees, wyes and stub-end. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. 

The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.

• Working range: Ø 28" IPS to 48" IPS (710 - 1200 mm)
• Extractable heating plate with separate thermometer
• Milling cutter with safety micro switch
• Electrohydraulic gearcase with a clamp opening and closing lever
• Hydraulic hoses with non-drip quick couplings
• Thermoregulator for the control of the working temperature

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 28" IPS to 48" IPS (710 - 1200 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 400V 50 - 60Hz, 3 Ph.
Total absorbed power 28200 W
Total weight 11728 lbs.
Delta 1400
This is a self-aligning machine, suitable for welding pipes for the transport of water and other fluids under high pressure, up to Ø 54" IPS (1400 mm). 

DELTA 1400 can weld fittings such as elbows, tees, wyes and stub-end. This is possible because the 3rd clamp can be anchored to the 1st and 2nd (movable) and slide along with the pipe. 

The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.

• Working range: Ø 32" IPS to 54" IPS (800 - 1400 mm)
• Extractable heating plate with separate thermometer
• Milling cutter with safety micro switch
• Electrohydraulic gearcase
• Thermoregulator for the control of the working temperature

On Request (Accessories)
• Machine body trolley
• Tool for flange necks
Pipe range 32" IPS to 54" IPS (800 - 1400 mm)
Pipe materials HDPE, PP, PVDF, PB
Fittings butt fusable elbows, tees, wyes, stub ends
Power supply 400V 50 - 60Hz, 3 Ph.
Total absorbed power 28200 W
ELEKTRA FUSION (ELECTROFUSION)

Elektra 400
Elektra 400 is an electrofusion machine suitable for welding low voltage HDPE and PP couplings (from 8 to 48 Volts) for high pressure conduits. The Elektra machine is made in accordance with the International Standards.

• Universal electrofusion machines
• For high pressure conduits up to 16" IPS
• Optic pen bar code
• Three way to set the welding parameters
• Memory that register 4000 welding cycles
• Data download through USB port graphic display

On Request (Accessories)
• Transfer kit for transferring welding data from the welding machine to a portable serial printer
• Data transfer software (Ritmo Transfer)
• Optical scanner, for reading barcodes
Elektra Brochure
Elektra 800
Elektra 800 is an electrofusion machine suitable for welding low voltage HDPE and PP couplings (from 8 to 48 Volts) for high pressure conduits. The Elektra machine is made in accordance with the International Standards.

• Universal electrofusion machines
• For high pressure conduits up to 32" IPS
• Optic pen bar code
• Three way to set the welding parameters
• Memory that register 4000 welding cycles
• Data download through USB port Graphic display

On Request (Accessories)
• Transfer kit for transferring welding data from the welding machine to a portable serial printer
• Data transfer software (Ritmo Transfer)
• Optical scanner, for reading barcodes
Technical Features
Working range up to 32" IPS
Welding output voltage 8 - 48 V
Single phase power supply 230 V-50/60 Hz
Max. output current 120 A
Operating mode Barcode/Manual (numerical code or tension/time)
Connections USB for external memory and RS232 serial printer
Memory capacity 4000 reports
Protection rating IP 54
Dimensions 14" x 11" x 12"
Weight 49.60 lbs.
Elektra Brochure
Ritmo Transfer
Ritmo Transfer is the new download software that amplifies the already wide potentiality of the ELEKTRA 400 and ELEKTRA 800 welders. 

The software was entirely designed and developed by Ritmo engineers and assures an easy and intuitive download of the fusion cycles data into any computer. This is a must for the companies being asked to certify their jobs. 

Ritmo Transfer features 10 languages, but the software will continue to be upgraded with new idioms, so that Ritmo gets even closer to its clients all over the world.
PIPE SCRAPERS

RTC 160
Essential patented (RTC series) tools for plastic pipes preparation before electrofusion. All models are composed of a mandrel device to cover all working diameters, a rotating arm with a blade, service tools and transport case.

• Available in three versions: RTC 160, RTC 315, RTC 710
• Working range external: Ø 2" IPS to 6" IPS
• Mandrel device to cover all working diameter
• Rotating arm with a blade supported
• Device designed to maintain constant thickness of the continuous chip
Working range 2" IPS to 6" IPS
Scraping Length 2.75"
Materials HDPE, PP, PVDF, PB
Scraping Profiles pipes, elbows, tees, stub ends
Dimensions 14.96" x 9.84" x 4.72"
Weight 8.5 lbs.
Pipe Scrapers Brochure
RTC 315
Essential patented (RTC series) tools for plastic pipes preparation before electrofusion. Al models are composed of a mandrel device to cover all working diameters, a rotating arm with a blade, service tools and transport case.

• Working range external: Ø 3" IPS to 12" IPS
• Mandrel device to cover all working diameter
• Rotating arm with a blade supported
• Device designed to maintain constant thickness of the continuous chip
Working range 3" IPS to 12" IPS
Scraping Length 5.4"
Materials HDPE, PP, PVDF, PB
Scraping Profiles pipes, elbows, tees, stub ends
Dimensions 16.14" x 12.2" x 20.08"
Weight 16.5 lbs.
Pipe Scrapers Brochure
RTC 710
Essential patented (RTC series) tools for plastic pipes preparation before electrofusion. Al models are composed of a mandrel device to cover all working diameters, a rotating arm with a blade, service tools and transport case. 

• Working range external: Ø 14" IPS to 28" IPS
• Mandrel device to cover all working diameter
• Rotating arm with a blade supported
• Device designed to maintain constant thickness of the continuous chip
Working range 14" IPS to 28" IPS
Scraping Length 20.8"
Materials HDPE, PP, PVDF, PB
Scraping Profiles pipes, elbows, tees, stub ends
Dimensions 32.48" x 31.69" x 27.36"
Weight 86 lbs.
Pipe Scrapers Brochure
Manual Scraper
The manual scraper is suitable for scraping the surface of plastic pipes which require treatment before the fusion with an electro-fusion coupling. 

The manual scraper consists of a practical handle in solid plastic and a strong blade in carbon steel with a cutting edge each side designed for long life durability.
HEATING PLATES

TP 125 TE
Series of manual instruments equipped with an aluminum heating plate Teflon-coated (PTFE) and a practical heat-insulated plastic handle. Available in three different models: TP 125 TE (up to 3" DIPS), TP 200 TE (up to 6" DIPS), TP 300 TE (up to 10" DIPS).

• Manual equipment
• Compact, lightweight, highly reliable
• Different working shapes
• Working range: up to Ø 3" DIPS
• Materials: HDPE, PP, PB, PVDF
• Available with: a fixed mechanical thermostat (TF) an adjustable electronic thermoregulator (TE)
• Power supply: 110 V and 230 V 
Working range 0 - 3" DIPS
Power Supply 230 V or 110, 50 - 60 Hz mono-phase
Rated Power Uptake 700 W
Operating Temperature 360° F - 540° F
Overall Dimensions 12" x 4" x 19"
Weight 4.5 lbs.
Heating Plates Brochure
TP 200 TE
Series of manual instruments equipped with an aluminum heating plate Teflon-coated (PTFE) and a practical heat-insulated plastic handle. Available in three different models: TP 125 TE (up to 3" DIPS), TP 200 TE (up to 6" DIPS), TP 300 TE (up to 10" DIPS).

• Manual equipment
• Compact, lightweight, highly reliable
• Different working shapes
• Working range: up to Ø 6" DIPS
• Materials: HDPE, PP, PB, PVDF
• Available with: a fixed mechanical thermostat (TF) an adjustable electronic thermoregulator (TE)
• Power supply: 110 V and 230 V
Working range 0 - 6" DIPS
Power Supply 230 V or 110, 50 - 60 Hz mono-phase
Rated Power Uptake 1200 W
Operating Temperature 360° F - 540° F
Overall Dimensions 17" x 8" x 2"
Weight 7 lbs.
Heating Plates Brochure
TP 300 TE
Series of manual instruments equipped with an aluminum heating plate Teflon-coated (PTFE) and a practical heat-insulated plastic handle. Available in three different models: TP 125 TE (up to 3" DIPS), TP 200 TE (up to 6" DIPS), TP 300 TE (up to 10" DIPS).

• Manual equipment
• Compact, lightweight, highly reliable
• Different working shapes
• Working range: up to Ø 6" DIPS
• Materials: HDPE, PP, PB, PVDF
• Available with: a fixed mechanical thermostat (TF) an adjustable electronic thermoregulator (TE)
• Power supply: 110 V and 230 V
Working range 0 - 10" DIPS
Power Supply 230 V or 110, 50 - 60 Hz mono-phase
Rated Power Uptake 1300 W
Operating Temperature 360° F - 540° F
Overall Dimensions 21" x 12" x 2"
Weight 11 lbs.
Heating Plates Brochure

PIPE TOOLS


Beveling
Suitable for plastic pipes and beveling, making it easier to insert sleeves and socket joints. 

Double function professional tools for beveling the ends of plastic pipes and determinate socket depth, for HDPE, PP, PB, PVDF.

Made in a special Aluminum alloy
Working range: up to Ø 2 IPS
Available in three model: SME 0, SME 1, SME 2
SME 0 SME 1 SME 2
O.D Capacity Actual Inches 0.98 - 2.95" 0.98 - 6.3" 1.57 - 9.84"
Pipe Material Plastic
Max thickness 0.39" 0.39" 1.38"
Total weight 1.5 lbs. 1.8 lbs. 3.1 lbs.
Tools Brochure
Pipe Cutters
These are professional tools, essential for the manual cut of plastic pipes up to Ø 12 3/8". 

The TC 108, T1, TU 75, TU 140, T3 and T4 pipe cutters are made with the very best alloys, and are very manageable and practical to use. 

The pipe cutters can be fitted with various special blades with appropriate cutting heights and penetration capacities to cut pipes of different materials. The TC 108 and T1 pipe cutters (with special blades) can cut Copper (Cu) and multilayer (PEx/Al, PPr/Al, etc.) pipes.
Type OD Capacity Actual Inches Dimensions Weight
TC 108 Ø1/4 - 2" (Ø6 - 50 mm) 7 - 9 x 26" 0.8 lb.
T1 Ø1/4 - 2 1/2" (Ø6 - 64 mm) 87 - 111 x 37" 1.3 lb.
TU 75 Ø1/4 - 3" (Ø6 - 76 mm) 97 - 13 x 4" 1.5 lb.
TU 140 Ø2 - 5 1/2" (Ø50 - 140 mm) 14 - 19 x 61" 3 lb.
T3 Ø3 15/16" - 6 6/30" (Ø100 - 160 mm) 146 - 183 x 79" 3.6 lb.
T4 Ø7 1/16" - 12 3/8" (Ø180 - 315 mm) 246 - 346 x 142" 15.4 lb.
Tools Brochure
Pipe Shears
Sturdy & versatile, the AC Shear is an essential tool when cutting PP-R and HDPE, PB, PVDF pipes from 0 to 2" IPS. 

The CD type can cut not only PP, HDPE, PB, PVDF pipes up to 1 1/2" IPS, but also non-rigid pipes and hoses. The AC and CD shears are made entirely with stainless steel, assuring extreme sturdiness and reliability. 

"Double Jack" System: With Double Jack system is it possible to cut all non-rigid pipes and hoses; this special device, present only in the CD type, prevents the blade from opening, therefore invalidating the cutting.
CA AC CD C3 AC
O.D Capacity Actual Inches 0 - 1.69" 0 - 2" 0 - 2.95"
Tools Brochure
Pipe Support
With this practical piece of equipment, the pipe can be locked to let the operator carry out quickly and with precision all operations previous to the welding cycle, like cutting, pickling, scraping, etc. 

This support's particular structure helps reach several inclination angles and heights, in order to better adapt to the requirements of the building site. 

Furthermore, a belt and a jack system helps a quick locking and releasing of the pipe. 

Supplied With
Base structure complete with locking belt ad service spanner.
Technical Features
Working range 1" - 16"
Dimensions
While being transported 34" x 14" x 31"
While being used (lowest position) 25" x 14" x 30"
While being used (highest position) 43" x 14" x 26"
Weight 33 lbs.
Tools Brochure
Share by: