HDD Equipment

HDD Equipment

HORIZONTAL DIRECTIONAL DRILLING ACCESSORIES & GUIDANCE SYSTEMS


View our horizontal directional drilling accessories and guidance systems below. Be sure to contact us with any questions or let us help you place your order.

HORIZONTAL DIRECTIONAL DRILLING ACCESSORIES


Railhead Tool Guide Railhead Contractors Catalog StraightLine HDD Catalog
Railhead Reamers – Dirt Reaming Products
Railhead Reamers 
Solid Body Fluted Reamers
Machined from tool steel and heat treated for strength and durability, these reamers are available with an API R eg box on the front and several options on the back. These options include a built-in 20K, 30K, 45K HDD swivel or draw bar. Now available with a pin back to allow for trailing rods or use as a centering wheel with the flow-through capabilities to attach a second reamer in tandem. The API box front will accept any API pin crossover to your thread. Made with shark teeth or conical carbide teeth.
Stacked Plate Reamers
These stacked plate backreamers feature a slow taper design and deep spiral fluting for smooth cutting and maximum mixing action. They are available with a built-in 30K or 45K swivel, drawbar, pin or box rear connection. The API box fronts will accept any API pin crossover to your drill thread.

For cobble, sandstones, shales, soft limestone, caliche and gravel.
Tapered Barrel Reamers
Tapered barrel reamers feature shark teeth carbide cutters in a spiral pattern, and a “packer” barrel rear for stability. Reamers have API REG box fronts and are available with built-in swivel, drawbar, pin or box rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill.

For cobbles, shales, river rock and hardpan.
Winged Reamers
Fabricated from heat-treated alloy steel for strength and durability, these winged reamers are available with a built-in 20K, 30K or 45K swivel, drawbar, pin or box rear connection. The API REG box fronts will accept any API pin cross-over needed to attach to your drill.

For sand with cobbles, sandstone and hardpan.
Clay Reamers
Fabricated from heat-treated alloy steel for strength and durability, these clay reamers are available with a built-in 20K, 30K or 45K swivel or drawbar, pin or rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill.

For aggressive cutting, mixing and pumping in sticky clay. Also, an excellent choice for shale and sandstone.
Fly Cutter Reamers
Fabricated from heat-treated alloy steel for strength and durability, the Tapered Wing Fly Cutter features three long tapered wings, offset cutters, multiple fluid ports, three packing and stabilizing ring segments, and is available with a drawbar, pin or box rear connection. The API REG box fronts will accept any API pin crossover needed to attach to your drill.

For consolidated loams, clays and semi-compacted soils.
The EXTReam™ Reamers – Rock Reaming Products
The EXTReam™ is a true rock reamer that is designed to stand up to the kind of hard rock and rocky conditions that tear up other reamers and hole openers.
StraightLine Reamers
StraightLine specializes in the design, development, and manufacturing of equipment for the horizontal directional drilling industry. Regardless of the brand of drill, size of drill or the ground conditions, we are committed to making your HDD operation the very best it can be.
Geological Boring - Reamers
Expandable with removable Expansion Rings
6" Backreamer Core expandable to 12"
8" Backreamer Core expandable to 30"

• Built-in 30,000-pound capacity swivel with ball thrust bearings and metal-to-metal Caterpillar type seals for long maintenance-free life
• Fluid flow adjustable both forward and rear
• Heat treated tool steel body
• Solid tungsten carbide cutting edges
Part Number Core Diameter (Inches) Treads
D302 6.0" 2 API I.F. Box
D168 8.0" 2 - 3/8 API Reg Box
D222 8.0" 3 - 1/2 API Reg Box
Part Number Expandable Ring Diameter (Inches)
D299 Expands 6" Core to 8" Diameter
D300 Expands 6" Core to 10" Diameter
D301 Expands 6" Core to 12" Diameter
D180 Expands 8" Core to 10" Diameter
D181 Expands 8" Core to 12" Diameter
D182 Expands 8" Core to 14" Diameter
D183 Expands 8" Core to 16" Diameter
D184 Expands 8" Core to 18" Diameter
HDD Drill Pipe (Vermeer & Ditch Witch Compatible)

Vermeer
Vermeer®-Compatible Rod Specifications

• Fully compatible with Vermeer® handling equipment
• All rods are heat treated to a minimum 135,000 lb yield strength for the ultimate in fatigue resistance
Vermeer Rod Spec Sheet
Ditch Witch
Jet Trac®-Compatible Rod Specifications

• Fully compatible with Jet Trac® handling equipment
• Many popular sizes available in both forged-end and inertia welded rods
Jet Trac®-Compatible Rod Spec Sheet
Other Rigs
• Premier carries rods for many out-of-production rigs. Ask us about our Maxi-rig Range 2 product line.
• Many popular sizes available in both forged-end and inertia welded rods
• All rods are heat treated to a minimum 135,000 lb yield strength for the ultimate in fatigue resistance
Other-Compatible Rod Specifications
HDD Starter Rods /Collars /Sub Savers / Housing Savers & Adapters 

Railhead products
HDD Tools and Pipe Components for all Rigs

Railhead housing savers, adapters and transition rods are used to greatly reduce the repair cost.  Selecting the proper tooling is crucial to the success of your operation.  Railhead offers tooling options for all rig and pipe manufactures on the market.  Please help us choose the proper tooling for your application
StraightLine Products
HDD Tools and Pipe Components for all Rigs

Proper tooling selection is critical to the success of your operation. It can be the difference between successful bores and failed ones. Tool selection will play a large part in the profits you make, save wear and tear on your drill rig and can even reduce the amount of diesel fuel you consume. When decisions are this crucial, it is no wonder that so many companies have come to rely on StraightLine® for their down hole tools.

StraightLine® produced its first directional drill in 1989. Since that time, StraightLine® has manufactured nearly one thousand drills and accumulated many thousands of hours of hands-on drilling experiences. We have drilling experience in every ground condition that creation could throw at us in locations all across North America, Australia, Europe and Asia. Final result, StraightLine® has the industry's most extensive line of HDD tools. At StraightLine® our emphasis on down hole tooling products isn't an afterthought, it is in our DNA.
HDD Mixing Systems

StraightLine - Mix & Storage Tanks
710 & 1,000 Gallon Mix & Storage Tanks

The main features for our mix and storage tanks are:

• Urethane paint on steel components
• 3" (7.6 cm) full port bungs
• Shutoff valves on the suction and discharge ports
• 710-gallon (2,688 L) tanks have a mix circuit with three tank guns to deliver a fast and thorough yield
• 1,000-gallon (3,785 L) tanks have a mix circuit with four tank guns to deliver a fast and thorough yield
Performix Mixing Systems
Our Performix® family of mixers delivers unmatched shearing, mixing and yield.

Bentonite is introduced to the system through a large diameter port, where it immediately encounters a high-speed jet stream. This high-speed stream is extremely effective at shearing and separating the bentonite plates, which dramatically speeds the yielding process.

• The result: maximum yield in shortest time.
• The benefit: less time mixing, more time drilling.
Performix® SL300 Self-contained 300 Gallon Mixing Solution
The SL300 is a complete, self-contained 300-gallon mixing solution ready to bolt to your truck or trailer and go to work. Its compact footprint makes it an ideal solution where space is at a premium.

The main features for the SL300 are:

• Tank Capacity: 300 gallons
• Engine: Kohler® Command CS Pro 6 Hp (4.5 Kw) engine
• Pump: 170-gpm (11 lps) designed to turn tank over in less than 2 minutes
• Fuel Tank: 6-gallon (23 L) fuel tank for extended run time between refueling
• Hopper: Large capacity with pivoting lid that doubles as a bag rest
• Jet: High-speed jet effectively shears the bentonite plates, thereby producing the highest possible yield
• Tank Guns: 3 tank guns intensify tank roll for rapid shearing and yielding
• Connections: 2" (5.1 cm) suction and discharge ports w/ball valves
• Mounting: Adapts easily to any trailer
Performix® Mixer
The Performix® Mixer with its 365-gpm output will get you from bentonite introduction to fully sheared, yielded and ready to drill in a matter of minutes. The Performix is the ideal match for our 700-gallon (2650-liter) tanks.

The main features for the Performix Mixer are:

• Engine: Kohler® Command CS Pro 12 Hp (9 Kw) gas engine w/heavy duty cyclonic air cleaner and electric start
• Pump: 365 (23 lps) gpm designed to turn tank over in less than 2 minutes
• Fuel Tank: 6-gallon (23 L) fuel tank for extended run time between refueling
• Hopper: Large capacity with pivoting lid that doubles as a bag rest
• Jet: High-speed jet effectively shears the bentonite plates, thereby producing the highest possible yield
• Mechanical Seal: Runs in antifreeze so seal is constantly lubricated (the pump can be run dry without damaging the seal)
• Connections: 3" (7.6 cm) camlock on suction side, 3" (7.6 cm) hose barb on discharge side and a 2" (5.1 cm) male cam-lock for supply hose
• Mounting: Adapts easily to any truck or trailer
Performi® Ultra Mixer
The Performix® Ultra Mix System with its 450-gpm output will get you from bentonite introduction to fully sheared, yielded and ready to drill in a matter of minutes. The Performix Ultra is ideally suited for our 1,000-gallon (3,800-liter) tank skid.

The main features for the Performix Ultra Mix System are:

• Engine: Kohler® 20 Hp (15 Kw) gas engine w/electric start
• Pump: 450-gpm (28 lps) designed to turn tank over in about 2 minutes
• Fuel Tank: 6-gallon (23 L) fuel tank for extended run time between refueling
• Hopper: Large capacity with pivoting lid that doubles as a bag rest
• Jet: High-speed jet effectively shears the bentonite plates, thereby producing the highest possible yield
• Mechanical Seal: Runs in antifreeze so seal is constantly lubricated (the pump can be run dry without damaging the seal)
• Connections: 3" (7.6 cm) camlock on suction side, 3" (7.6 cm) hose barb on discharge side and a 2" (5.1 cm) male cam-lock for supply hose
• Mounting: Adapts easily to any truck or trailer
Performix® Diesel Mixer
The Performix® Diesel Mixer with its 450-gpm output will get you from bentonite introduction to fully sheared, yielded and ready to drill in a matter of minutes. The Performix Ultra is ideally suited for our 1,000-gallon (3,800-liter) tank skid.

The main features for the Performix Diesel Mixer are:

• Engine: Lombardini 25HP diesel engine w/electric start
• Pump: 450-gpm (28 lps) designed to turn tank over in about 2 minutes
• Fuel Tank: 6-gallon (23 L) fuel tank for extended run time between refueling
• Hopper: Large capacity with pivoting lid that doubles as a bag rest
• Jet: High-speed jet effectively shears the bentonite plates, thereby producing the highest possible yield
• Mechanical Seal: Runs in antifreeze so seal is constantly lubricated (the pump can be run dry without damaging the seal)
• Connections: 3" (7.6 cm) camlock on suction side, 3" (7.6 cm) hose barb on discharge side and a 2" (5.1 cm) male cam-lock for supply hose
• Mounting: Adapts easily to any truck or trailer
Surface to Surface Mixers
STS Mixers are the top performers for the right mix, every time. With the widest selection of options available, you can get the right fit for your project or work environment.

STS Mixers are guaranteed to perform the way we say they will, or you can return the mixer for a full refund. We’re proud to say that out of the hundreds of mixers sold, not one has been returned.

Take a look at the range of sizes and options, and if you don’t find exactly what you need, contact us for a discussion about your custom requirements.

M-Series Mixers (Portable and Independent)
The M series universal mixers are designed with the same attention to detail our customers have come to trust from the time-proven M series mixers from STS. Powered by your choice of power options and driving a 2, 3 or 4-inch centrifugal pump, it makes effective use of the patented 4-point mixing system. The M series of mixers can be used as a new installation or retrofitted into an existing system.

Since the unit can be connected by hoses or hard piping, the placement of the mixer versus the tank(s) is less restricted and a configuration to suit the available space and the contractor's needs is easier to achieve. The small size also allows it to be used as a portable, independent unit that can be transported separately from site to site.

With dimensions ranging from as small as 33" long x 38" wide and 300 lbs (M2) to 62" long x 46" wide and 1250 lbs (M4), and with the choice of four power options, you should be able to choose a unit to suit your needs.

Click on each model below to learn more:
M-300 Mixers (SAM Juniors)
The M-300 was the original Sam-Series Mixer, designed and manufactured primarily for smaller size drill rigs as an alternative to using plain water. A 3" centrifugal pump makes effective use of the patented STS mixing system. This mixing unit can provide 300 gallons of yielded fluid for your drill rig in less than five minutes. The compact unit can be transported to the job site in a standard 8' pickup box.

Click on each model below to learn more:
M-300G
M-300D
M-300E
M-300H
M-750 Mixers (SAM Seniors)
The M-750, with its rectangular loaf-shaped Roto-Mold tank, is a space saving design with an almost square footprint. With a 4-inch centrifugal pump, this unit makes effective use of the patented STS mixing system and is capable of providing 750 gallons of yielded fluid to your drill rig in less than eight minutes. Added benefits include the ability to draw water from a second tank and send mud to your drilling rig or storage tank without the use of a second pump. It is lightweight for easy transport and fits any 8' flat deck.

Click on each model below to learn more:
M-750G
M-750D
M-750E
M-750H
M-750L
M-750LH 
M-1500 Mixers (Dual Tank Series)
The M-1500 is a dual-tank system that allows two methods of mixing: you can mix 750 gallons of yielded fluid in less than eight minutes, while holding 750 gallons of water reserve in the second tank for the next mix; or mix one large batch of 1500 gallons of full yield in less than 16 minutes. The operator controls the two methods of mixing by changing the direction of flows through the piping connections using the manually-operated full flow valves. The vacuum port located in the mixing tee has the ability to draw water from the second tank when being used as a reservoir, and the drill fluid can then be sent to your drilling rig without the use of a second pump. This model has been a popular choice for HDD contactors due to its small space-saving footprint relative to its capacity.

Click on each model below to learn more:
HDD Air Hammers

StraightLine
Double your production rate with the industry's hardest-hitting air hammer.

At home in a variety of rock and soil conditions, StraightLine® Steerable Air Hammer Systems are designed to turn any rig into a rock-drilling machine, capable of drilling at rates up to 150 feet per hour.

Three key design features drive our hammer systems' performance:

Powerful
The StraightLine® hammers incorporate a heavy-duty outer body, which allows for a larger, harder-hitting piston. For example, the AH5.0's 30-pound piston is nearly 2x heavier than competitive hammers. Its simple physics: a heavier piston delivers more percussive force per blow to the bit face which translates into faster penetration rates.

Durable
StraightLine® has taken durability to a whole new level, extending component life up to 10x, driving operating costs down and profits up. It's no secret, we have simply fitted our ground engaging components with strategically placed raised carbides that provide serious gage protection. You can think of it as body armor. For example, our AH5.0 sports 78 raised carbide buttons encasing the bent sub and running the entire length of the transmitter housing.

Steerable
The StraightLine® Air Hammer System combines powerful hammering action with our precise two-point steering system to successfully navigate a wide variety of ground conditions. No matter whether you are faced with solid hard-rock formations, soft rock formations or intermittent conditions such as boulders separated by soil, our Air Hammer Systems’ will hit your target.

Additional Benefits: Unmatched ROI & Environmental Friendliness
Unmatched ROI: turns your existing drill into a rock drill; low capital investment; low cost per foot of operation, production rates up to 150' per hour; bottom line, no other method can match the cost/performance ratio of the StraightLine® Hammer System.

Environmentally Friendly: the StraightLine® Air Hammer Systems really shine when environmentally sensitive jobsites are encountered. Only 1/2 to 5-gpm of fluids are required for transmitter cooling, hammer lubrication and hole cleaning leaving the jobsite virtually spotless.
HDD Mud Motors
INROCK
INROCK's new "XTM" Mud Motor
INROCK is proud to announce its new line of Mud Motors. These motors are now being built in house for better service and reliability. The new XTM mud motor is designed to increase the torque capacity of the driveshaft and bearing assembly, thereby providing longer component life and reducing service costs.

INROCK® supplies specialized directional motors and services focusing on the requirements of the trenchless construction contractor. INROCK's® wide variety of motors and components provide the most efficient configuration for each specific drilling application.

INROCK® strives to assist the drilling contractor in selecting the best motor for the job. Proper motor selection requires matching motor specifications with: rock type; the drill rigs available, hydraulics, and drill stem capabilities to yield the highest torque, rpm, power to diameter ratio, and power to length ratio.

Features:
Power Sections:
Unique selection of motor/stator designs provide higher torque at lower flow rates and allow varying tool lengths specific to the job. Standard Size Ranges: 3-3/8", 3-3/4", 5", 6-1/4", 6-3/4", 8"

Directional Configuration: 
Complete selection of fixed or adjustable bent housings; slick or eccentric housings; and wear protection. Adaptive to walkover guidance systems or wire line guidance systems. Unique, TCI enhanced, stabilized top sub minimizes outer housing wear in HDD applications. The new "XTM" comes with a rugged, fixed bend housing.

Services: 
Project Planning; 24-hour Technical Assistance; Field Training; Repair Service locations across North America, Europe, and the Far East.

Pricing Options: 
Flexible pricing available from short-term rentals to long-term leases and purchases.
HDD Break Out Tongs

StraightLine
StraightLine's Portable Breakout Wrench Kit provides a safe and reliable method of breaking torqued joints. The unit is compact in design making it easy to handle in and out of tight spots, and with each half weighing in at just over 35 pounds, the kit is easily maneuvered into position. This kit is designed for use with tool outer diameters of 3" through 5-1/4".
Inrock
A very safe, hydraulic or electric powered, portable make-up/ break-out tong set. Quick and easy hookup to handle your toughest connections with ease, control, and most importantly, safety. Contractors keep their crews safe with Safety Tongs!

General Specifications:

• The ultimate in safety and control to makeup or breakout your toughest connections.
• Maximum torque adjustment is hydraulically controlled
• Fast and easy hook up (for easiest operation use back hoe or lifting machine)
• Loosen or tighten pipe of the same or different diameters
• Pump options include:
- hydraulic hand pump
- 12 V DC electric pump
- AC electric pump
               - auxiliary hydraulic control panel
• 20 foot hydraulic hoses

Note: This application requires special modifications and should not be attempted with standard tongs.

Size OD Range
2.6 K 1 - 5"
7.5 K | 2 1/4" - 4 7/8"
15 K | 3 1/4" - 5 1/4"
50 K | 4" - 8"
90 K |  4" - 12"
120 K | 6" - 9 1/4"
Sonde Housings & Bits
Railhead
Railhead products are built tough and fit all major brands of mini-HDD machines on the market.
Dirt Boring Projects
The Endurance product line consists of a series of conventional bits and a sonde housing that is designed for contractors who do not drill in the kind of conditions that require an INCREDIBIT®.
Solid Connection
The key feature of the Endurance line is how we attach the bits to the housing. We've developed a keyway system that takes the side stress off the bolts which virtually eliminates the problem of drill bits breaking off the housing.
Durable Housing
While the Endurance housings are designed specifically for the Endurance bits, they incorporate many of the most popular features of our INCREDIBIT® housing, but at a much lower cost. We've used the Tri-Lock door and sonde blocks to protect the transmitter. We also use housing savers so, if the threads get messed up, you don't have to buy a whole new housing. We believe the Endurance housings will outlast any other dirt housing that's on the market today.

Versatile
The Endurance line uses all of our current connections to the most popular HDD machines, including the Railhead Quick Connect System. For contractors who use the INCREDIBIT®, the Endurance bits are designed to also fit the INCREDIBIT® housing.
Reliable
From the INCREDIBIT® to the Endurance line, Railhead's products are designed to provide contractors the ultimate reliability in downhole tooling.
Rock Boring Products

Railhead's INCREDIBIT® drill head is named for its ability to bore and steer through tough, rocky conditions. Its patented technology allows contractors to accomplish bores in ground that cannot be drilled with conventional bits. Andit allows smaller machines to drill through some conditions that would otherwise require a mud motor. It is truly a multipurpose bit that steers through soft conditions as well as rock and cobble.
How the Incredibit® works
The INCREDIBIT® bores in an entirely different manner than any other bit. Rather than using simple abrasion, the INCREDIBIT® fractures rock in a random elliptical pattern. It “dances” in the hole, allowing the INCREDIBIT® to be productive in all kinds of soils and formations.

Because of the “dancing” effect, the INCREDIBIT® bores a larger hole than conventional bits. In most conditions, a 2 ¾" bit will cut approximately a 4" hole, a 3" bit will cut approximately a 5" hole, a 3 ½" bit will cut approximately a 6" hole, and a 4 1/8" bit will cut approximately an 8" hole.

StraightLine

Transmitter Housings
With 15 models, including duckbill (off-center cut) or centerline cut, side load or end load, StraightLine® makes a housing for your application.
Bits
StraightLine® offers a comprehensive line of bits suitable for any ground condition you may encounter.
Geological Boring

Sonde Housing
Manufactured using heat-treated nickel-chrome-molly alloy steel. 

• Six fluid passages COMPLETELY SURROUND the transmitter chamber to create an effective heat exchanger that removes drilling heat and helps keep heat sensitive electronics cool.
• Largest fluid flow capacity available - FLEXIBILITY to directional drill today and motor tomorrow
• Clock the transmitter in seconds - Transmitter clocks to drill head 12 o’clock quickly with our internal sealed Indexing Cartridge
• Transmitter chamber sealed to over 2500 PSI drilling fluid pressure
• Provides your work crew maximum flexibility
• NO set-screws to drill out or bolts to rattle loose
• Epoxy filled slots keep transmitter and transmitter chamber CLEAN AND FREE of muck and cuttings.
Bits

Bog Hog

Designed for: glacial til, clays, soft boggy soils, compacted soils and hard conglomerates


Duro Bore

Designed for adverse geologies: cobbles, fractured shales, cobbles, caliche and compacted soils

Duro Spade

Designed for adverse geologies: compacted soils, glacial til, hard conglomerates and clays.

Quick Steer

Designed for adverse geologies: hard conglomerates, glacial til, clays and compacted soils

Horizontal Directional Drilling Products

Product Name Description Product Data Sheet MSDS
AQUA-CLEAR® PFD Dispersant  Liquid polymer dispersant  AQUA-CLEAR® Product Data Sheet N/A
BAROLIFT® Hole Cleaning / Suspension Aid Chemical & temperature stable synthetic fiber BAROLIFT Data Sheet BAROLIFT MSDS
BIO-BORE™ HDD Fluid Concentrate Clay-free, biodegradable drilling fluid BIO-BORE Product Data Sheet BIO-BORE MSDS
BORE-GEL® Horizontal Boring Fluid  One-sack boring fluid system for use in HDD BORE-GEL Product Data Sheet BORE-GEL MSDS
CON DET® Wetting Agent Water soluble surfactant blend CON DET Product Data Sheet CON DET MSDS
DIAMOND SEAL® Lost Circulation Material Water-swellable crystalline dry polymer DIAMOND SEAL Product Data Sheet DIAMOND SEAL MSDS
DINOMUL® Wellbore Stabilizing Fluid Aqueous lubricating fluid for torque reduction N/A N/A
EZ-MUD® Borehole Stabilizer/Viscosifier PHPA liquid polymer emulsion EZ-MUD Product Data Sheet EZ-MUD MSDS
EZ-MUD® GOLD Clay/Shale Stabilizer Dispersable, low viscosity, PHPA dry polymer EZ-MUD GOLD Product Data Sheet N/A
IDP-681 Polymer-Based HDD Fluid Polymer-based HDD fluid system N/A N/A
N-SEAL™ Lost Circulation Material Acid soluble lost circulation material N-SEAL Product Data Sheet N-SEAL MSDS
NO-SAG® Suspension Enhancer Biopolymer additive NO-SAG®️ Product Data Sheet NO-SAG®️ MSDS
PENETROL® Rate of Penetration Enhancer Water miscible proprietary blend of surfactants PENETROL® Product Data Sheet PENETROL® MSDS
POLY-BORE™ Borehole Stabilizing Agent PHPA dry polymer high molecular weight POLY-BORE™ Product Data Sheet POLY-BORE™ MSDS
QUIK-GEL® High-Yield Gellant/Viscosifier High yield treated sodium bentonite QUIK-GEL® Product Data Sheet N/A
QUIK-TROL® Filtration Control/Viscosifier Dry modified cellulosic polymer QUIK-TROL® Product Data Sheet QUIK-TROL® MSDS
QUIK-TROL® LV Filtration Control Low viscosity dry cellulosic polymer QUIK-TROL® LV Product Data Sheet N/A
Soda Ash pH Adjustment/Water Softener Sodium carbonate Soda Ash Product Data Sheet Soda Ash MSDS

PIPE PULLING ATTACHMENTS


Internal Pullers

StraightLine
Standard Expanding Pullers 

Designed to grip polyethylene ducting using expanding jaws to grip the inside wall of the duct.
1604-100-05 Standard Expanding Puller (2-1/2") fits 2.2" to 2.6" ID 4.9 lb.
1604-100-06 Standard Expanding Puller (3") fits 2.55" to 3.2" ID 8.4 lb.
1604-100-07 Standard Expanding Puller (4") fits 3.275" to 4.1" ID 13.6 lb.
1604-100-08 Standard Expanding Puller (5") fits 4.17" to 5.125" ID 21.2 lb.
1604-100-09 Standard Expanding Puller (6") fits 5.13" to 6.08" ID 24.6 lb.
Condux
PE & PVC Pulling Eyes 

Condux PE & PVC Pulling Eyes provide optimum gripping power and a watertight design. The watertight pulling eyes feature a multiple O-ring configuration, an extremely rigid center rod to prevent bending and a steel tapered lead cone with the same OD as the conduit. These design features protect the outer leading edge of the conduit and form a watertight seal. Condux PE & PVC Pulling Eyes also feature split gripping segments with aggressive gripping threads coupled with a steel expander plug that better grips the full range of conduit IDs. 

Installation of the PE & PVC Pulling Eyes simply requires the leading eye to be tightened. The pulling eyes come standard with attachment eyes at both ends for connecting rope or steel lines. Pull-out strengths generally exceed the tensile capacity of the conduit.
Condux Internal Pullers Brochure
Designed to grip polyethylene and PVC pipes using expanding jaws to grip the inside wall of the pipe. Installation of the PE & PVC Pulling Eyes simply requires the leading eye to be tightened. The pulling eyes come standard with attachment eyes at both ends for connecting rope or steel lines. Pull-out strengths generally exceed the tensile capacity of the conduit.
Expandable Duct Pullers
Printable Series 00619 Catalog Printable Series 00619 Instructions Printable Series 00616 Catalog Printable Series 00616 Instructions Printable Series 00620/00621 Catalog Printable Series 00620/00621 Instructions
Sealed Duct Pullers
Printable Series 00650/00651 Catalog Printable Series 00650/00651 Instructions Printable Series C2012-125 Catalog Printable Series C2012-125 Instructions
Wire Grips

Light Duty Grips
Light duty grips are the most economical pulling grips for many applications, such as industrial plant wiring, rewiring, and underground electrical pulls.
Part No. Grip Size Pipe Size
50 - 50L 0.50 - 0.61 1/2"
50 - 62L 0.62 - 0.74 5/8"
50 - 75L 0.75 - 0.99 3/4"
50 - 100L 1.00 - 1.24 1"
Medium Duty Grips
Medium duty pulling grips are ideal for overhead and underground pulling applications that require additional durability at an economical price. Medium duty pulling grips are hand crafted with single weave strands that graduate to a double weave design for added strength and durability.
Part No. Grip Size Pipe Size
50 - 75M 0.75 - .099 3/4"
50 - 100M 1.00 - 1.24 1"
50 - 125M 1.25 - 1.49 1 1/4"
50 - 150M 1.50 - 1.99 1 1/2"
Heavy Duty Grips
K-type pulling grips feature a double weave of galvanized steel for greater strength and added mesh contact with the cables as well as a forged steel compact rotating eye, which can be attached to a swivel. They are designed to handle longer or heavier pulling jobs such as an installation of underground cables, communication lines and service lines.
Part No. Grip Size Pipe Size
50 - 150H 1.50 - 1.99 1 1/2"
50 - 200H 2.00 - 2.49 2"
50 - 250H 2.50 - 2.99 2 1/2"
50 - 300H 3.00 - 3.49 3"
50 - 400H 4.00 - 4.50 4"
Heavy Duty Swivel Grips
Part No. Grip Size Pipe Size
50 - 75S 0.75 - .099 3/4"
50 - 100S 1.00 - 1.24 1"
50 - 125S 1.25 - 1.49 1 1/4"
50 - 150S 1.50 - 1.99 1 1/2"
50 - 200S 2.00 - 2.49 2"
50 - 300S 3.00 - 3.49 3"
50 - 400S 4.00 - 4.49 4"
Plastic Chain Pullers
This pipe pulling system allows you to pull any type of jointed pipe under the ground without pulling the joints apart.

PCP-2   2" plastic pipe
PCP-3   3" plastic pipe
PCP-4   4" plastic pipe
PCP-5   5" plastic pipe
PCP-6   6" plastic pipe
PCP-8   8" plastic pipe

*All packages include 50' of 5/16" chain.
*Additional chain may be purchased.
SWIVELS

StraightLine
HDD Tools and Pipe Components for All Rigs

Proper tooling selection is critical to the success of your operation. It can be the difference between successful bores and failed ones. Tool selection will play a large part in the profits you make, save wear and tear on your drill rig and can even reduce the amount of diesel fuel you consume. When decisions are this crucial, it is no wonder that so many companies have come to rely on StraightLine® for their down hole tools. 

StraightLine® produced its first directional drill in 1989. Since that time, StraightLine® has manufactured nearly one thousand drills and accumulated many thousands of hours of hands on drilling experiences. We have drilling experience in every ground condition that creation could throw at us in locations all across North America, Australia, Europe and Asia. Final result, StraightLine® has the industry's most extensive line of HDD tools. At StraightLine® our emphasis on down hole tooling products isn't an afterthought, it is in our DNA.

Pullback Swivels
Introduced in 1991, StraightLine® offers a complete line of field proven pullback swivels 5-ton to 45-ton.
StraightLine HDD Catalog
Condux International has been manufacturing cable installation tools and equipment for over 30 years. Condux D. Drill® Directional Drilling Swivels are designed specifically for directional drilling by preventing the boring equipments rotational torque from interfering with the cable or conduit, they come in a wide range of sizes for a variety of horizontal directional drilling (HDD) and pulling applications. The D Drill Swivels are greasable and double sealed to keep contaminants out.
400 D. Drill Swivel
819 D.Drill Swivel
Directional Drilling Swivel Brochure Directional Drilling Swivel Literature
Break-away D.Drill Swivel
Condux Break Away Brochure
Directional Drilling Products

Specially formulated for use in a bentonite clay environment. This is an extreme pressure multiservice lubricant designed to give outstanding performance in directional drilling/boring applications. Manufactured from the highest quality petroleum oil and thickened with a unique calcium complex soap. This thickener resists breakdown caused by bentonite, which is common with lithium based lubricants. Packaged in cartridges to fit a standard grease gun.
Directional Drilling Products Brochure Directional Drilling Products Literature
Share by: